Product Description
A Pure Sine Wave Inverter with Charger is a device that converts direct current (DC) to alternating current (AC) to power a variety of equipment, including power tools, computers, appliances, pumps, audio/video equipment and more. Inverter with chargers use separate user-supplied batteries to supply power to connected equipment. When utility power is present, Inverter with Chargers automatically pass through power to your equipment while simultaneously recharging your connected batteries. When utility power is absent, such as during a blackout in stationary applications Inverter with Chargers automatically switch from utility power to battery backup power.
| AC output | AC110V/120V or AC220V/230V/240V |
| Phase & waveform | Single phase & sinewave |
| Acceptable Voltage | 95-127VAC or 194-243VAC (wide mode） |
| Line Low Transfer | 85V±4% or 184 (154 wide mode±4%) |
| Line Low Return | 95V±4% or 194 (164 wide mode±4%) |
| Line high Transfer | 135V±4% or 253±4% |
| Line high Return | 127V±4% or 243±4% |
| Frequency | 50Hz or 60Hz (auto sensing) |
| Line Low Transfer | 47Hz for 50Hz,57Hz for 60Hz |
| Line high Transfer | 55Hz for 50Hz,65Hz for 60Hz |
| Phase & waveform | Single phase & sinewave（bypass mode sync to input） |
| Voltage Regulation | ±10%rms（bypass mode sync to input） |
| Frequency | 50Hz±0.3Hz（bypass mode sync to input） |
| Crest Power | 3 times of ratings |
| Short Circuit Protection | Yes, shutdown after 10 minutes |
| Power Factor | 0.9-1.0 |
| DC Input | |
| Battery Voltage | 12V |
| Minimum Start Voltage | 10V |
| Low Battery Alarm | 10.5V |
| Low Battery Transfer | 10V |
| High Voltage Alarm | 16V |
| Max Charging Current | 35A |
| Over Charge Voltage | 15.7V |
| Transfer Efficiency | |
| line Mode | ＞95% |
| Battery Mode | ＞88% |
| power saver | Available when the load is less than 25 Watts |
| Indicators | |
| 7-LED Display | From the right to the left,LED1 line mode (green lighting)、LED2 inverter mode (green lighting)、LED3 charging mode（yellow lighting）、LED4 Fully charged (green lighting)、LED5 over heat shutdown(red lighting）、LED6 Overloaded shutdown（red lighting）、LED7 Saving Mode（green lighting） |
| 3-LED Display | Charging Mode(green lighting)、inverter mode(green lighting)、Alarm（red lighting） |
| Switch selector | Saving Mode is on/off when push the switch forwards/backwards, keeping it horisontal is turning the inverter off. |
| Audible Alarm | Sounding when the heatsink’s tem is over 105℃ and shutdown after 30 seconds. |
| Protections | low battery、over charging、over temp、over load |
| Enviromental | |
| Operating Environment | 0-40℃,0-90%RH(non-condensing) |
| Audible Noise | ＜60dB |