» UPS Domestic Kits
Pure sine wave inverter-charger for UPS systems

UPS Domestic Kits

From £548

These UPS Domestic kits are supplied with connecting cables at no extra charge.

Out of stock

Product Description

Our Pure Sine Wave Kits

Rated
Continuous Power		 Peak Power Battery Capacity Endurance
(rated power /500W benchmark)
Basic
(1000W)		 Pure sine wave inverter-charger for UPS systems 1000W 3000W 110Ah battery 12 V
140 Ah		 1.7 / 3.4 hrs
TYPICAL USAGE: Computer, router, lights in 5 rooms, TV, Freeview/cable box, fridge/freezer and washing machine
Intermediate
(1500W)		 Pure sine wave inverter-charger for UPS systems 1500W 4500W 2 batteries 220Ah 24 V (2 x 12 V)
220 Ah
(2 x 110 Ah)		 1.8 / 5.3 hrs
TYPICAL USAGE: Computer, router, lights in 5 rooms, TV, Freeview/cable box, fridge/freezer and washing machine
Premium
(2000W)		 Pure sine wave inverter-charger for UPS systems 2000W 6000W 2 batteries 220Ah 24 V (2 x 12 V)
220 Ah
(2 x 110 Ah)		 1.3 / 5.3 hrs
TYPICAL USAGE: Computer, router, lights in 6 rooms, TV, Freeview/cable box, fridge/freezer, washing machine, and either microwave or kettle intermittently
Heavy Duty
(3000W)		 Pure sine wave inverter-charger for UPS systems 3000W 9000W 4 batteries 440Ah 24 V system voltage
440 Ah
(4 x 110 Ah)		 1.8 / 10.6 hrs
TYPICAL USAGE: Computer, router, lights in 6 rooms, TV, Freeview/cable box, fridge/freezer, washing machine, and either microwave or kettle intermittently

A Pure Sine Wave Inverter with Charger is a device that converts direct current (DC) to alternating current (AC) to power a variety of equipment, including power tools, computers, appliances, pumps, audio/video equipment and more. Inverters with  a charger use separate user-supplied batteries to supply power to connected equipment. When utility power is present, Inverter with Chargers automatically pass through power to your equipment while simultaneously recharging your connected batteries. When utility power is absent, such as during a blackout in stationary applications Inverter with Chargers automatically switch from utility power to battery backup power.

 

 

AC output AC110V/120V or AC220V/230V/240V
Phase & waveform Single phase & sinewave
Acceptable Voltage 95-127VAC   or    194-243VAC (wide mode）
Line Low Transfer 85V±4%          or     184 (154 wide mode±4%)
Line Low Return 95V±4%          or     194 (164 wide mode±4%)
Line high Transfer 135V±4%        or      253±4%
Line high Return 127V±4%        or      243±4%
Frequency 50Hz or 60Hz (auto sensing)
Line Low Transfer 47Hz for 50Hz,57Hz for 60Hz
Line high Transfer 55Hz for 50Hz,65Hz for 60Hz
Phase & waveform Single phase & sinewave（bypass mode sync to input）
Voltage Regulation ±10%rms（bypass mode sync to input）
Frequency 50Hz±0.3Hz（bypass mode sync to input）
Crest Power 3 times of ratings
Short Circuit Protection Yes, shutdown after 10 minutes
Power Factor 0.9-1.0
DC Input
Battery Voltage 12V
Minimum Start Voltage 10V
Low Battery Alarm 10.5V
Low Battery Transfer 10V
High Voltage Alarm 16V
Max Charging Current 35A
Over Charge Voltage 15.7V
Transfer Efficiency
line Mode ＞95%
Battery Mode ＞88%
power saver Available when the load is less than 25 Watts
Indicators
7-LED Display From the right to the left,LED1 line mode (green lighting)、LED2 inverter mode
(green lighting)、LED3 charging mode（yellow lighting）、LED4 Fully charged
(green lighting)、LED5 over heat shutdown(red lighting）、LED6 Overloaded
shutdown（red lighting）、LED7 Saving Mode（green lighting）
3-LED Display Charging Mode(green lighting)、inverter mode(green lighting)、Alarm（red lighting）
Switch selector Saving Mode is on/off when push the switch forwards/backwards,   keeping it horisontal is
turning the inverter off.
Audible Alarm Sounding when the heatsink's tem is over 105℃ and shutdown after 30 seconds.
Protections low battery、over charging、over temp、over load
Enviromental
Operating Environment 0-40℃,0-90%RH(non-condensing)
Audible Noise ＜60dB

 

Main Specifications

Voltage: 12V

Terminal Type: Standard Round (Type 1)

Terminal Layout: Positive on Left (Layout 1)

Height (mm): 230

Width (mm): 175

Length (mm): 345

Weight (kg): 23

Construction: Lead Acid

Maintenance Free: Yes

Warranty (Years): 3

Calcium Technology: Yes

Deep Cycle: Yes

Sealed: No

   PSW Unit       Length (mm)       Height (mm)        Width (mm)        Weight (kg)   
1000W 442 218 179 18
1500W 442 218 179 20
2000W 442 218 179 20
3000W 442 218 179 28
4000W 598 218 179 38
5000W 598 218 179 44
6000W 598 218 179 48