Solar water heating, solar water heating kits, solar kettle, renewable energy,SHW,vacuum tube,heat pipe,solar collector,twin coil,solar water cylinder,immersion heater,Solar controller,solar twin,solartwin
image


Solar Speed Flex

High quality, pre-insulated, flexible solar pipes
ideal for installing our solar hot water kits

  • Easy installation, no soldering, no multiple joints, no bending tools.  The flow and return can be completed with just one continuous length of pipe each.  Bends can be made perfectly by hand, and due to the flexible nature of the pipe, complex pipe runs can be completed in minutes.

  • Tube can be cut to exact length.  No special tools are required for making joints.

  • Saves time and effort

  • High quality flexible corrugated stainless steel tube

  • Aeroflex high temperature EPDM insulation coated with tough black film protects against UV, the weather, bird pecking etc.

  • Working temperature -57°C to 150°C

  • Maximum pressure 17.5 bar

  • Can be connected to solar hot water systems with all standard components

  • We have two pipe sizes and three different lengths in stock.

  • Cheaper than the traditional labour intensive alternative of copper pipe used in conjunction with Armaflex HT (high temperature) insulation.
Pipe ends




  • DN 12 is recommended for systems incorporating a single 18or 30 tube collector


  • DN 16 is recommended for systems incorporating 2 to 4 of our 30 tube collectors


  • All our pipe kits are supplied with brass fittings for a fast, secure, leak free installation.
Solar SpeedFlex diagram Solar SpeedFlex diagram

CALCULATE LENGTHS OF PIPES NEEDED

Enter the following measurements, in metres, to get an estimate of how much Solar SpeedFlex pipe to order.

If you have only one panel, enter zero in the fourth box.

(1) Distance (m), cylinder to pumpstation:


(2) Distance (m), pumpstation to panel:


(3) Distance (m), panel to cylinder:


(4) Distance (m) between panels:


Minimum values to order:
(Rounded up to nearest 10 metres)

Metres of RETURN pipe to order:

Metres of FLOW pipe (with sensor cable) to order:



















Ordering Details

We can now supply Solar Speed Flex in two pipe sizes (DN 12, DN 16) and three standard lengths: 10, 20 and 30 metres.

FLOW pipes are for the HOT feed to the cylinder and have a built-in sensor cable

There are two ways to order:

You can order your SpeedFlex pipework as 10, 20 or 30 metre kits (same lengths for flow and return pipes) complete with the SpeedFlex pipe fittings (4 x 22 mm and 2 x 15 mm connectors).

You can order in custom lengths of 10, 20 or 30 metres for each of flow and return pipes.
  DN 12 (12 mm internal diameter)   DN 16 (16 mm internal diameter)    
10 m kit
(10 m flow + 10 m return pipes,
4 x 22 mm + 2 x 15 mm connectors)		 £146 10 m kit
(10 m flow + 10 m return pipes,
4 x 22 mm + 2 x 15 mm connectors)		 £161
20 m kit
(20 m flow + 20 m return pipes,
4 x 22 mm + 2 x 15 mm connectors)		 £246 20 m kit
(20 m flow + 20 m return pipes,
4 x 22 mm + 2 x 15 mm connectors)		 £276
30 m kit
(30 m flow + 30 m return pipes,
4 x 22 mm + 2 x 15 mm connectors)		 £326 30 m kit
(30 m flow + 30 m return pipes,
4 x 22 mm + 2 x 15 mm connectors)		 £372
Choose DN 12 pipe kits
Choose DN 16 pipe kits
10m flow insulated pipe £65 10m flow insulated pipe £73
  10m return insulated pipe £60   10m return insulated pipe £68    
20m flow insulated pipe £120 20m flow insulated pipe £136
  20m return insulated pipe £110   20m return insulated pipe £126    
  30m flow insulated pipe £165   30m flow insulated pipe £189    
  30m return insulated pipe £150   30m return insulated pipe £174    
   
SpeedFlex fittings
(4 x 22 mm + 2 x 15 mm connectors)		 £29 SpeedFlex fittings
(4 x 22 mm + 2 x 15 mm connectors)		 £29
 
Choose DN 12 pipe lengths
   
Choose DN 16 pipe lengths
     



Return to Contemporary Energy's HOME PAGE.


| View site map
cash advance loan companies
image